Your needs, this model
Does it fit your priorities?
Is a powered centrifugal extractor essential rather than a citrus press or slow auger?
The exact page names a Big Mouth Juice Extractor and the linked CJ14 manual describes a powered micro-mesh basket.
Explore this need in the finder →Would a published 3-inch feed opening suit your usual produce and prep?
The exact page documents a 3-inch Big Mouth opening, which can reduce some cutting but does not override produce preparation or pusher directions.
Explore this need in the finder →Does one on/off control work, or do you need selectable speeds?
The linked CJ14 guide shows one on/off control and no documented speed selector.
Explore this need in the finder →Can the supplied cup remain an unknown capacity, or is a measured minimum essential?
The manufacturer FAQ confirms a cup is included for 67650, but neither it nor the product page states a volume. With no minimum requirement it can remain a candidate; an essential 32-ounce minimum is not met by unknown information.
Explore this need in the finder →Do dishwasher-safe removable parts suit you if the mesh still needs prompt brushing?
The exact page calls removable parts dishwasher-safe, while the linked guide says to brush the basket promptly and avoid SANI; the motor base stays out of water and the dishwasher.
Explore this need in the finder →Will the exact 11.5-inch listed body depth fit, with extra workspace for the bin and receiver?
The exact page lists 11.5 inches of body depth. A 11.5-inch body cap passes that measurement; 11.4 inches does not, and either leaves out working clearance.
Explore this need in the finder →The Hamilton Beach Big Mouth Pro Juice Extractor 67650 is an exact U.S. centrifugal model with a 3-inch feed opening, a single on/off plan, an external pulp bin, and dishwasher-safe removable parts. Its maker page also confirms a three-year limited warranty and gives body dimensions of 14.4 inches high by 7.8 wide by 11.5 deep. A manufacturer FAQ says a juice cup is supplied, but neither source states that cup’s capacity, so this is not a well-documented large-pitcher choice.
Start with the opening and your produce routine
The exact 67650 page describes a three-inch Big Mouth chute and names whole apples, peeled oranges, and handfuls of kale as examples. A generous opening can reduce some cutting, but it does not turn every carrot, long cucumber, beet, or large piece of fruit into a no-prep ingredient. Follow the guide for peel and pit directions, prepare awkward shapes safely, and always use the pusher rather than fingers. The manual describes a locked-cover, motor-driven stainless micro-mesh basket that separates juice into a receiver under the outlet and pulp into a removable side container.
That operation suits someone who wants a powered produce extractor rather than a citrus cone, hand press, or slow auger. It does not establish a comparative extraction result. The product page’s statements about quick juicing or maximum yield are manufacturer marketing, not a test we performed. If you routinely juice tender leaves, fibrous produce, or want a particular texture, do not treat a three-inch opening or a wattage label as proof of recipe performance.
A supplied cup is not a measured batch size
Hamilton Beach’s FAQ lists exact model 67650 among the machines supplied with a juice cup. The exact product page does not give a cup volume, and the FAQ does not either. The glass shown in the studio image is not evidence of what is in the box. If your routine is one small serving and you are comfortable selecting a separate glass, the missing cup capacity may not affect your shortlist. If you require a verified 20-, 32-, or 34-ounce receiver, do not count this model as satisfying that hard minimum. The nearby 67608A page does state a 20-ounce cup, while 67608Z lists 16 ounces; those values belong to those exact suffixes, not to 67650.
One switch is simple, not adjustable
The linked CJ14 manual covers model 67650 and shows a single on/off switch. That is a straightforward arrangement if you do not need a low/high selection, a quiet-labeled mode, or a variable dial to adapt the machine to different ingredients. Choose a model with the exact control you need if selecting speeds is essential. The Big Mouth name, single switch, and electrical rating do not reveal a measured rotation rate, sound level, juice temperature, or service life.
There is also an inconsistency worth preserving rather than converting into a performance claim. A feature bullet and detailed copy on the exact 67650 page call the motor 1.1 horsepower, while the same page’s product image alt text says 800 watts; the linked manual’s CJ14 rating panel lists 67650 at 800 W, 120 V and 60 Hz. This review uses 800 W as the documented electrical rating and calls out the conflicting horsepower language. Neither figure is an independent extraction test.
Measure the whole setup and plan for mesh care
The exact page lists the body as 14.4 H × 7.8 W × 11.5 D inches. Measure in that orientation and then allow separate room for the tall pusher, side pulp bin, receiving glass, power cord, and safe removal of the basket and cover. The 11.5-inch depth is a listed body measurement, not the full workspace needed to feed food or wash parts. If your counter is tight, compare it with the exact 67608A listing, which gives a slightly shorter 11.46-inch depth, or a compact model—but do not silently substitute another code’s dimensions.
The page calls removable parts dishwasher-safe; the manual adds important limits. Brush the fine metal mesh promptly under running water before pulp dries, handle the sharp central blades carefully, and keep the motor base out of water and the dishwasher. The guide says not to use the high-heat sanitize cycle. If overload protection stops the motor, unplugging and allowing 15 minutes to cool is recovery advice, not a routine run-time promise. Pulp-bin volume, normal continuous-use time, and a verified cleaning-time result are not published.
Who should shortlist the exact 67650?
Consider it when you want a wide feed opening, accept one on/off control, can fit the listed body and external bin, and will brush a mesh basket promptly. It is a weaker fit if a documented pitcher capacity, selectable speed, lower-noise control, measured yield, or hard session limit is essential. At the time checked, the U.S. manufacturer page displayed an add-to-cart path; availability can change. Search the exact “67650” model rather than shopping by the Big Mouth Pro family name.
What the 67650A code tells you—and what it does not
The manufacturer’s FAQ confirms that 67650A includes a cup. Its model index lists 67650A beside 67650, and 840148108 explicitly allows suffixes on its listed 67650/CJ14 models. This supports shared basic operation only. A-specific dimensions, finish, warranty, availability, other package contents, and image remain unknown. The image below is for base 67650 only; use the code on the item or box when shopping.

Sources: Hamilton Beach’s exact 67650 page, the linked 840148108 Use & Care guide, the manufacturer’s juice-cup and juicer-care FAQ, and its model index. This is a source-based assessment, not hands-on extraction, yield, noise, or durability testing.
Key details at a glance
| Extraction method | Centrifugal fruit-and-vegetable extractor |
|---|---|
| Pulp bin placement | External side bin |
| Published feed-chute width | 3 in |
| Speed control | Single-speed on/off |
| Motor electrical rating | 800 W |
| Listed width | 7.8 in |
| Listed depth | 11.5 in |
| Listed height | 14.4 in |
| Dedicated Quiet selector label | No |
| Filter basket dishwasher-safe | Yes |
| Controls and use | The linked 840148108 CJ14 English guide for model 67650 depicts and describes a single ON/OFF switch. The exact page does not establish a low/high, variable, or quiet selector. |
| Cleanup note | Switch off and unplug before disassembly. Brush both sides of the stainless mesh basket under running water promptly before pulp dries; its fine pores can clog and the central blades are sharp. Other removable pieces may be dishwasher-cleaned per the maker, but not on SANI; do not immerse or wash the motor base. |
| Manufacturer jug label | The Hamilton Beach FAQ lists exact model 67650 as supplied with a juice cup, but neither FAQ nor exact product page states cup capacity. Unknown volume is not treated as a supplied minimum. |
| Fast/firm juicing guidance | The linked manual specifies a 15-minute unplug/cool-down if overload protection stops the motor, not a routine continuous-use schedule. |
| Blender mode on the same base | No |
| Manual-described lower-noise juicing range | No |
| Body-fit measurement note | The exact 67650 page lists 14.4 H × 7.8 W × 11.5 D inches. Allow additional room for the feed tube/pusher, side pulp bin, glass under the outlet, power cord and safe washing access. |
| Electrical-rating caveat | The exact 67650 page has an internal motor wording conflict: feature/detail text says 1.1 Hp, while an exact-page product-image alt label says 800 watts; its linked 840148108 CJ14 rating panel lists base 67650 at 800 W, 120 V, 60 Hz. Record 800 W as the manufacturer electrical rating, not measured extraction performance or an inferred conversion. |
| Filter configuration | Stainless steel micro mesh strainer basket |
| Hand-powered operation | No |
| Removable parts dishwasher-safe per manual | Yes |
| Automatic ingredient-sensing mode | No |
| Manufacturer-listed voltage | 120 V |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
- Hamilton Beach U.S. Big Mouth Pro Juice Extractor exact model 67650
- Hamilton Beach 840148108 Big Mouth Juice Extractor Use & Care guide; 36 pages, English operating section and CJ14 rating panel inspected
- Hamilton Beach FAQ on included juice cups, juicer use and care
- Exact manufacturer product image linked from the U.S. product page for model 67650
- Hamilton Beach official patent/model index listing models 67650 and 67650A under patent 7,481,155
Now check the model against your kitchen.
Use the finder for extraction style, batch, cleanup, control, and counter-fit requirements.