Hamilton Beach Big Mouth Juice Extractor 67600 review

Hamilton Beach’s Big Mouth Juice Extractor 67600 is an earlier, white, single-switch centrifugal model, not the later Big Mouth Pro 67650. The U.S. manufacturer page still identifies 67600 and says it is no longer available. Its page lists an 800-watt motor, an extra-wide feed chute and a dishwasher-safe pulp bin, but does not publish dimensions, chute width, or a juice-cup capacity. Treat this review as a way to evaluate an exact 67600 offer or identify a machine you already own—not as evidence that a generic Big Mouth listing has the same package.

Start with the exact code, not the family name

The exact U.S. page prints model 67600 and marks it “No Longer Available.” If you are checking an older or used offer, ask for a clear label photo: “Big Mouth” alone does not distinguish it from 67601, 67608 suffix models, or the Pro 67650.

The page lists 800 watts, an extra-wide opening, and a dishwasher-safe pulp bin. Its linked 840148108 CJ14 manual lists 67600 among five base models and notes that suffixes may appear. That manual supplies shared operating and safety instructions; it does not make each model’s package or dimensions interchangeable.

What its operating routine actually supports

The manual describes a motor-driven stainless-steel micro-mesh strainer basket, a separate large pulp container, a feed pusher, and one ON/OFF switch. To use it, seat the basket inside the strainer bowl, secure the cover with both latches, place an independently chosen glass or other vessel below the juice spout, and set the pulp bin beside the body. Start the motor and guide prepared produce through the opening with the pusher. The manual says apples, carrots, and cucumbers can often go in whole; it recommends peeling oranges, melons, or mangoes to reduce flavor effects and requires pitting fruits with pits or large seeds.

This is the simple centrifugal plan to consider if you do not need separate speed settings. The manual describes only an on/off control, and the rating panel identifies 120 V, 60 Hz, 7.5 A or 800 W. The page calls the opening “Extra-Wide,” but neither source gives its numeric diameter. If a three-inch minimum or another exact chute threshold is essential, the 67600 cannot meet it on the available evidence. The same caution applies to a strict counter-fit limit: there are no exact body dimensions on its product page, so use a model with a documented footprint if a few tenths of an inch decide whether it fits.

Receiver and cleanup details are not interchangeable

The manual labels a “Juice Cup (with select models),” while the 67600 page shows a cup as a separately listed accessory and a glass in the product image. Neither confirms that a receiver was included in the original 67600 box, or states a capacity. The manufacturer FAQ’s named cup lists do not resolve 67600. If a supplied pitcher or even a specific minimum serving volume is essential, treat both inclusion and capacity as unknown; a pictured glass is not package evidence. The external pulp bin is described only as extra-large, not in ounces or quarts.

Care demands a little attention after each batch. The exact page says the pulp bin is dishwasher-safe. The shared CJ14 manual marks the micro-mesh basket dishwasher-safe, warns against the SANI cycle, keeps the motor base out of water and the dishwasher, and recommends prompt brushing under running water before pulp dries in the fine mesh. It also warns the basket has sharp central blades and should be checked before each use; do not use a cracked, bent, or damaged basket. The manual’s 15-minute cooling direction applies if overload protection stops the motor, not as a normal session limit. Do not read it as a promise that a particular batch can run continuously for that long.

Who should consider this earlier model?

It can make sense when you are evaluating a specific 67600 seller offer, already own the exact model, want a straightforward centrifugal extractor, and can accept a single switch plus unknown receiver, dimensions, and measured chute width. It is a poor fit when you need a verified three-inch opening, a named pitcher size, two speeds, a published footprint, or a current manufacturer purchase path. If those documented details matter, compare an exact 67601J page, which specifies a three-inch opening and a footprint, or the 67650 Big Mouth Pro, which has its own exact page and separate cup evidence. Do not transfer those newer models’ measurements or package claims to 67600.

Because the maker marks this exact product no longer available, any seller search should include the complete “Hamilton Beach 67600” code. Check the label, basket condition, parts, receiver, and seller terms; the original manual’s three-year U.S. warranty language does not prove used-unit coverage. A seller’s general Big Mouth title or the white studio image alone cannot establish those details.

Sources: Hamilton Beach’s exact U.S. 67600 page, its linked 840148108 CJ14 Use & Care guide, and the maker’s juicer FAQ. The manufacturer’s recall notice lists six older codes, not 67600; that limited notice check is not a full recall-history or safety determination. This assessment makes no hands-on yield, noise, cleaning-time, or durability claim.