Hamilton Beach Big Mouth Pro Juice Extractor 67608A review

The Hamilton Beach Big Mouth Pro Juice Extractor 67608A is the version to consider when you want a three-inch produce opening and a small, included juice cup without jumping to a two-speed machine. Hamilton Beach’s exact U.S. page describes one simple powered extractor, a separate pulp bin and a 20-ounce cup. Those concrete details make it easier to plan than the vague promise of “whole-food” juicing, but they do not turn the cup into a large-batch pitcher or the chute into a no-prep guarantee.

The 20-ounce cup is a useful included piece, not a yield rating

The 67608A product page explicitly lists a 20 oz juice cup in its details, and Hamilton Beach’s FAQ independently names model 67608A among the codes supplied with a juice cup. This is a practical distinction from models whose maker page leaves the receiver unlisted: the buyer can plan for the cup that belongs to this exact code. But the number describes the vessel, not how much juice a particular load of carrots, apples or greens will produce. If your routine involves larger servings or pouring for more than one person, plan to use another glass or collection container under the outlet; do not mistake “extra-large pulp bin” for a juice pitcher.

A three-inch mouth reduces some cutting, not every prep step

The maker says the round chute is three inches wide and gives a whole apple, peeled orange or handful of kale as examples. That can shorten prep when your produce fits the opening. Shape and length still matter, and the shared CJ14 guide tells you to prepare some ingredients: peel citrus, melon and mango when their skin could affect flavor, and pit stone fruit. Wash produce, assemble the strainer bowl and basket, lower the cover, lock both latches, and set the pulp container beside the body. Feed gradually with the pusher rather than pressing hard or using your fingers. The wide opening changes the cutting decision; it does not cancel the manual’s safety and preparation instructions.

One switch is a real operating limit

This is a centrifugal layout: the motor spins a stainless-steel micro-mesh basket to separate liquid from solids, and a side container receives the pulp. Its operating plan is simple—connect it to household mains power, lock the top assembly, set the supplied cup or your own receiver beneath the spout, turn the single control on, and feed prepared produce. The exact page’s feature list says “1.1 Hp,” while its own detailed copy says 800 watts; the reused CJ14 rating panel lists the 67608 base at 800 W. That mismatch is worth noticing, so this review uses the documented electrical rating and makes no horsepower-based speed or yield claim. One on/off setting also means no selectable low speed if you want a special routine for softer ingredients or a lower-noise control.

Measure the complete working setup

Hamilton Beach lists the 67608A at 14.41 inches high, 7.8 inches wide and 11.46 inches deep. Measure the counter and the route for the side pulp container, the cup below the spout, and the clearance needed to lift off the cover and pusher. Those are body dimensions, not a guarantee that the complete operating area fits beneath a shelf. The large-bin description is not a volume specification, so the maker’s words do not support a hard pulp-capacity requirement.

Dishwasher-safe parts still need prompt basket care

Hamilton Beach says the removable juicing pieces are dishwasher-safe. The shared CJ14 manual still excludes the motor base and warns against the high-heat sanitize setting; it also describes the micro-mesh basket as delicate and calls for brushing both sides under running water promptly after use. This matters more in ordinary ownership than the phrase “easy clean”: pulp can dry in the fine holes, and the center blades are sharp. If you are willing to rinse and brush the basket immediately, the dishwasher-safe removable parts are a helpful second step. If you expect to leave the strainer until later, this layout is a poor fit.

Where it fits among nearby choices

The 67608A had a purchase path on Hamilton Beach’s page when checked. Its close model 67608Z is not interchangeable by name alone: the Z page showed an out-of-stock notice, a 16 oz cup and a 14-inch listed depth. The 67608A instead has a 20 oz cup and 11.46-inch listed depth. Compare the exact code and contents if you see a seller listing. The reviewed 67601J also has a three-inch chute and single-switch plan, but its page does not document an included juice cup; its listed depth is 11.5 inches. For a more compact counter the reviewed 67500J is much shallower, but its chute is 2.4 inches and asks for more cutting. If you require a 32-ounce pitcher, a second speed, a measured pulp-bin volume, a quiet mode, or demonstrated yield, none of those needs is established for 67608A.

Shortlist the 67608A if you value the larger opening, want a documented 20-ounce cup in the exact package, have room for the listed body and side bin, and can clean the micro-mesh basket promptly. Check the exact 67608A code on a seller’s listing; do not substitute another Pro suffix when cup size and dimensions matter. Sources: Hamilton Beach’s exact 67608A page, its linked CJ14 manual, and the maker’s FAQ. No hands-on extraction, yield or noise testing is claimed.